First-gen Database
First-gen Diamante Maintenance Parts/Fluids/etc. | |
---|---|
North American / JDM 3.0 Liter Trims | |
Battery | Group Size 24 Minimum CCA: 490 |
Oil | Ambient temps over 100° F: 10W-30 All Others: 5W-30 |
Oil Drain Plug Torque | 40 Nm (29 ft-lbs) |
Oil Filter | Filter: WIX 51334XP or failing that Mitsubishi MD136790 or MZ690116 Screw on by hand, after the O-ring makes contact tighten it another 3/4 turns with a filter wrench. |
Engine Air Filter | WIX 46057 |
Spark Plugs | NGK 6741 Laser Iridium or NGK 3764 Iridium IX or NGK 2743 PFR6J-11 (DOHC) NGK 3903 Iridium IX or NGK 7133 BPR6ES-11 (SOHC) |
Spark Plug Wires | NGK 8101 RC-ME78 (DOHC) SOHC used 3 different kinds so you will have to do car-specific research. If you contact me with your VIN I should be able to tell you what you need. |
Wheels & Tires | Tire size: 205/65R15 94V Tire pressure: 32 psi front, 26 psi rear. (Note: This is from the American service manual, JDMs with 4WD I'm not sure if it would be different. The 3000GT VR-4 says 32/29 so it may be good to run that, that is what I do.) |
Wheel Lug Nut Torque | 65-80 ft-lbs |
Power Steering Fluid | ATF DEXRON II |
Brake Fluid | DOT4 or DOT3 |
Engine Coolant | Fluid: DIA-QUEEN LONG-LIFE COOLANT 0103044 or high quality ethylene-glycol Capacity: 8.5 quarts including heater and coolant reserve system |
Note: These are Amazon affiliate links so if you use them I will make some pennies from the sale to help with hosting costs. However, these are the same products I would recommend in either case no matter where you buy them.